Electrovalves

Electrovalves

 

DL2 - Solenoid operated directional control hydraulic valve

Direct acting, subplate mounting directional control valve, CETOP R02, with mounting surface according to ISO 4401-02 (CETOP RP 121H) standards.

Compact design with reduced solenoid dimensions, suitable for mini-power packs and mobile and agricultural applications.

The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop. Wet armature solenoids with interchangeable coils are used.

The valve is supplied with 4 way designs, with 2 or 3 positions and with several interchangeable spools with different porting arrangements.

The valve is available with DC or rectified current solenoids.

Tech specs: pmax 250 bar - Qmax 20 l/min

 
41100 | |
 

DS3 - Solenoid operated directional control hydraulic valve

Direct acting, subplate mounting directional control hydraulic valve, CETOP 03, with mounting surface according to ISO 4401 (CETOP RP121H) standards.

The valve is supplied with 3 or 4 ways designs, with 2 or 3 positions with a wide range of interchangeable spools.

The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop. Wet armature solenoids with interchangeable coils are used.

The valve is available with DC or AC solenoids. DC solenoids can also be fed with AC power supply, by using connectors with a built-in rectifier bridge.

The DC valve is also available in a soft-shifting version.

Alternative to the standard manual override there are lever, push, boot and mechanical detent devices.

 
41150 | | | 3D
 

DL3 - Solenoid operated directional control hydraulic valve

Direct acting, subplate mounting directional control hydraulic valve, CETOP 03, with mounting surface according to ISO 4401-03 (CETOP RP 121H) standards.

Suitable for the mobile sector (agricultural machines), it has four different surface treatments available: standard phosphating, carbonitriding with oxidation process, semi-gloss epoxy painting,gloss polyurethane. The valve is available with DC or AC current solenoids and with several types of electrical connections (DIN 43650, AMP JUNIOR, with outgoing cables, DEUTSCH DT04-2P, AMP SUPER SEAL, DUAL DIN 43650), to cover various installation requirements.

Compact design with reduced solenoid dimensions, suitable for mini-power packs and mobile and agricultural applications.

The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop. Wet armature solenoids with interchangeable coils are used.

The valve is supplied with 3 or 4 way designs and with several interchangeable spools with different porting arrangements.

The valve is available with DC or AC current solenoids and with several types of electrical connections to cover various installation requirements.

The DC valve comes with boot protected manual override which ensures a protection degree IP69K with connections type K7 and K8.

Tech specs: pmax 280 bar - Qmax 50 l/min

 
41211 | | | 3D
 

DL3B - 8 Watt solenoid operated directional control valve

8 watt direct acting, subplate mounting directional control valve, CETOP 03, with mounting surface according to ISO 4401-03 (CETOP RP 121H) standards.

Compact design with reduced solenoid dimensions, suitable for mini-power packs and mobile and agricultural applications.

The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop. Wet armature solenoids with interchangeable coils are used.

The valve is supplied with 4 way designs and with several interchangeable spools with different porting arrangements.

The valve is available with DC current solenoids with 24 V power supply.

 
41220 | | | 3D
 

DS3JB - Solenoid operated directional control valve with junction box NFPA D03

Direct acting, subplate mounting directional control valve, with mounting surface according to NFPA D03 standard.

The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop. Wet armature solenoids with easily removable interchangeable coils are used.

It is supplied with junction box for the electrical connection.

The valve is supplied with 3 or 4 way designs and with several interchangeable spools with different porting arrangements.

The valve is available with AC solenoids.

 
41231 | |
 

MDS3 - Solenoid operated directional control valve - Modular

The MDS3 valve is used to switch multiple flow directions, or to select pressure values.

The oil passage holes pass right through the entire valve body and due to this particular design feature, the MDS3 can be assembled with all ISO 4401-03 (CETOP 03) modular valves.

The special connection of the valve in parallel to the P - T - A - B lines of the circuit allows easy construction of differents hydraulic configurations, reducing pressure drops to a minimum.

Soft-shift feature available for some DC versions.

 
41251 | | | 3D
 

MDF3 - Shut-off solenoid valve - Modular version - CETOP 03

Shut-off solenoid valve, direct-acting, available in two versions at rest: with lines blocked and with unloading lines.

It is normally used with directional control servovalves to guarantee the circuit’s safety in case of a power failure.

Wet armature solenoids with interchangeable coils are used.

 
41270 | | | 3D
 

DS5 - Solenoid operated directional control hydraulic valve

Direct acting, subplate mounting directional control hydraulic valve, CETOP 05, with mounting surface according to ISO 4401 (CETOP RP121H).

The valve is supplied with 3 or 4 way designs and with several interchangeable spools with different porting arrangements.

The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop. Wet armature solenoids with interchangeable coils are used.

The valve is available with DC or AC solenoids. DC solenoids can also be fed with AC power supply, by using connectors with a built-in rectifier bridge.

The DC solenoids DS5 directional valve is available in the following special versions:

- version with Y external subplate drain port
- version with soft-shifting
- version with adjustable “soft-shift” device.

 
41310 | | | 3D
 

DS5JB - Solenoid operated directional control valve - Junction box

Direct acting, subplate mounting directional control valve, with mounting surface according to NFPA D05 standard.

The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop. Wet armature solenoids with easily removable interchangeable coils are used. It is supplied with junction box for the electrical connection.

The valve is supplied with 3 or 4 way designs and with several interchangeable spools with different porting arrangements.

The valve is available with AC solenoids.

 
41320 | |
 

DL5 - Solenoid operated directional control valve - Compact

Direct acting, subplate mounting directional control hydraulic valve, CETOP 05, with mounting surface according to ISO 4401 (CETOP RP 121H) standards.

Suitable for the mobile sector (agricultural machines), it has four different surface treatments available: standard phosphating,carbonitriding with oxidation process, semi-gloss epoxy painting, gloss polyurethane. The valve is available with several types of electrical connections (DIN 43650, AMP JUNIOR, with outgoing cables, DEUTSCH DT04-2P, AMP SUPER SEAL, DUAL DIN 43650), to cover various installation requirements.

The valve is suitable for special applications, guaranteed by the reduced solenoid dimensions.

The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop. Wet armature solenoids with interchangeable coils are used.

The valve is supplied with 3 or 4 way designs and with several interchangeable spools with different porting arrangements.

The valve is available with DC or AC current solenoids.

Tech specs: pmax 320 bar - Qmax 125 l/min

 
41330 | | | 3D
 

DL5B - DC Solenoid operated directional control valve - Compact

Direct acting, subplate mounting directional control hydraulic valve, CETOP 05, with mounting surface according to ISO 4401 (CETOP RP 121H) standards.

The valve is suitable for special applications, guaranteed by the reduced solenoid dimensions.

The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop. Wet armature solenoids with interchangeable coils are used.

The valve is supplied with 3 or 4 way designs and with several interchangeable spools with different porting arrangements.

The valve is available with DC current solenoids only.

Tech Specs: pmax 320 bar - Qmax 125 l/min

 
41335 | | | 3D
 

MDS5 - Solenoid operated directional control valve - Modular

MDS5 is used to switch multiple flow directions or to select pressure values.

The oil passage holes pass right through the entire valve body and due to this particular design feature, the MDS5 can be assembled with all ISO 4401-05 (CETOP 05) modular valves.

The special connection of this hydraulic valve in parallel to the P, T, A and B lines of the circuit allows easy construction of different hydraulic configurations, reducing pressure drops to a minimum.

 
41351 | | | 3D