Distribuidores

Distribuidores

 

DSH* - Válvula direccional de mando con palanca

Actualización de catálogo: DSH3 en serie 11 – curvas y dimensiones actualizadas.
DSH5 – caudal 150 l/min – límites actualizados.

Bajo petición se pueden obtener versiones especiales con mando de palanca en posición diferente de las propuestas en el catálogo, después de una evaluación de factibilidad.

 
41600 | | | 3D
 

DSH3L - Válvula direccional de mando con palanca, versión compacta

  • caudal nominal 60 l/min
  • cursores S*, SK*, TA, TAK
  • estado de acabado W7 (zinc-níquel) opcional
 
41605 | | | 3D
 

DSR3 - Valvula direccional de mando mecánico

The DSR3* are roller cam operated directional control valves, available with 4 ways, with mounting interface according to ISO 4401 (CETOP RP121H) standards.
The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop.
It is available in LIGHT (short) and HEAVY DUTY (long) versions, with 2 positions with return spring or with 2 positions with double mechanical command.
The roller of the valve operating device can be positioned at 90° with respect to the valve mounting surface, in order to achieve flexible installation.
This type of valve can be used as a hydraulic stroke end for cylinders, speed selectors (not compensated), hydraulic safety devices, directional control of hydraulic axes.

 
41610 | | | 3D
 

DSA* -Válvula direccional de mando neumático

The DSA* are pneumatically operated (1) directional control valves, available with 3 or 4 ways with several interchangeable spools (2) and with mounting interface according to ISO 4401 (CETOP RP121H) standards.

The valve body (3) is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop.

It is available with 2 or 3 positions with return spring, or with 2 positions with mechanical retention.

The Y external drain is available (standard) for the ISO 4401-05 (CETOP R05) size and it must be connected when there is backpressure higher than 25 bar on the T port.

 
41620 | | | 3D
 

DSC3 - Válvula direccional de mando hidráulico

The DSC3 are hydraulically operated directional control valves, available with 3 or 4 ways with several interchangeable spools and with mounting interface according to ISO 4401 (CETOP RP121H) standards.

The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop.

It is available with 2 or 3 positions with return spring, or with two positions with mechanical retention.

 
41630 | | | 3D
 

DSB* - Válvula a inversión automática

pmax 320 bar
Qmax 100 l/min


La válvula invierte la dirección del flujo cuando está en condición de anulación de caudal en una de las dos vías (por ejemplo, cuando el cilindro llega a fin de carrera).
El proceso de inversión automática ocurre independientemente de la presión de la carga.

 
41640 | | | 3D