Distributeurs

Distributeurs

 

DSH* - Distributeur à commande manuelle

Mise à jour du catalogue : DSH3 en série 11 - Courbes et encombrements mis à jour.
DSH5 - débit 150 l/min – limites mises à jour.
Il sera possible, sur demande et après évaluation de la faisabilité, d’avoir des versions spéciales avec commande à levier dans une position autre que celles qui sont proposées sur catalogue. 

 

 
41600 | | | 3D
 

DSH3L - Distributeur à commande manuelle, version compacte

  • débit nominal 60 l/min
  • tiroirs S*, SK*, TA, TAK
  • finissage zinc-nickel W7 optionnel
 
41605 | | | 3D
 

DSR3 - Distributeur avec commande mécanique

The DSR3* are roller cam operated directional control valves, available with 4 ways, with mounting interface according to ISO 4401 (CETOP RP121H) standards.
The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop.
It is available in LIGHT (short) and HEAVY DUTY (long) versions, with 2 positions with return spring or with 2 positions with double mechanical command.
The roller of the valve operating device can be positioned at 90° with respect to the valve mounting surface, in order to achieve flexible installation.
This type of valve can be used as a hydraulic stroke end for cylinders, speed selectors (not compensated), hydraulic safety devices, directional control of hydraulic axes.

 
41610 | | | 3D
 

DSA* - Distributeur avec commande pneumatique

The DSA* are pneumatically operated (1) directional control valves, available with 3 or 4 ways with several interchangeable spools (2) and with mounting interface according to ISO 4401 (CETOP RP121H) standards.

The valve body (3) is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop.

It is available with 2 or 3 positions with return spring, or with 2 positions with mechanical retention.

The Y external drain is available (standard) for the ISO 4401-05 (CETOP R05) size and it must be connected when there is backpressure higher than 25 bar on the T port.

 
41620 | | | 3D
 

DSC3 - Distributeur avec commande hydraulique

The DSC3 are hydraulically operated directional control valves, available with 3 or 4 ways with several interchangeable spools and with mounting interface according to ISO 4401 (CETOP RP121H) standards.

The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop.

It is available with 2 or 3 positions with return spring, or with two positions with mechanical retention.

 
41630 | | | 3D
 

DSB* - Valve à inversion automatique

pmax 320 bar
Qmax 100 l/min
La valve renverse la direction du flux quand elle se trouve en condition d’annulation du débit sur une des deux voies (par exemple quand le cylindre arrive à la fin de la course). Le procédé d’inversion automatique se vérifie indépendamment de la pression de la charge.
 
41640 | | | 3D