新产品

新产品

 

BD6 - 片式方向控制阀

最大工作压力 280 bar

最大流量 40 l/min

该阀为片式阀,以其叠加式设计著称,最多可安装6个模块,并联或者串联连接。BD6阀适合工程机械和工业微型动力站的紧凑式应用。串联形式可集成先导单向阀。

 
44100 | | | | 3D
 

EDM-M* - 数字放大器,用于开环比例阀

EDM-M*型卡是一种用于开环比例阀控制的数字放大器。其设计符合导 轨式安装形式:DIN EN 50022。

该单元提供和参考输入信号成比例的可变电流,不受温度变化或者负载 阻抗的影响。

电磁铁电源的PWM特性减小了阀的滞环,从而优化了控制精度。该单 元可提供三种主要形式,可控制单电磁铁阀(M1),双电磁铁阀(M2) 和 两个独立通道控制两个单电磁铁阀(M3)。每个形式均可根据相应的阀, 优化定制各种不同的最大电流规格和开关频率(PWM)。

参数调节可通过前面板上的按键和显示完成,或者通过RS232 或USB 转换器(EDMPC/20 软件),连接笔记本电脑实现。

 
89250 | | |
 

DXE3J - Directional control valve, pilot operated, with OBE and feedback

— DXPE*J are directional control valves operated by a servo-proportional pilot, with mounting surface compliant with ISO 4401 standards.
— The spool position is controlled by a linear transducer LVDT in closed loop, which ensures high precision and repeatability. In the event of
switch-off or inactive electronics the main spool is set to a fail-safe position by springs.
— The valve is featured by integral electronic based on SMD technology which ensures standard regulations and simplifies the electric wiring. The
unit does not require any adjustment.
— The valve is easy to install. The driver directly manages digital settings. In the event of special applications, you can customize the settings using
the optional kit.

 
85320 | | | | 3D
 

FV6 - Fixed displacement vane pumps

— The FV6 pumps are fixed displacement vane pumps, with several nominal displacement each. Single, double and triple pumps are available.
— The pumping group is composed of a cartridge element that contains rotor, vanes, cam ring and support plates. Cartridges are easily removable without disconnecting the pump from the hydraulic circuit, thus simplifing the maintenance operations.
— The special elliptical profile of the cam ring, with double suction and delivery chambers one against the other, eliminates the radial thrusts on the rotor, reducing wear of the pump. The use of a 10 vane rotor reduces the delivery pressure pulsations, suppressing the vibrations and noise level of the pump.

 
13110 | | |
 

EWM-2SS-DAD - Card for 2 axis positioning in closed loop control with profibus interface

— The EWM-2SS-DAD card is designed for controlling the stroke position of 2 axes

— Additionally, the synchronized control of the axes is available

— Both SSI or analogue sensor input are available

— The module communicates with the PLC via the embedded Profibus interface

— Card configuration is made via software, via USB

CLICK HERE to download the start-up manual.

 
89470 | | |
 

FV7 - Fixed displacement vane pumps

— The FV7 pumps are fixed displacement vane pumps, with several nominal displacement each. Single, double and triple pumps are available.
— The pumping group is composed of a cartridge element that contains rotor, vanes, cam ring and support plates. Cartridges are easily removable without disconnecting the pump from the hydraulic circuit, thus simplifing the maintenance operations.
— The special elliptical profile of the cam ring, with double suction and delivery chambers one against the other, eliminates the radial thrusts on the rotor, reducing wear of the pump. The use of a 10 vane rotor reduces the delivery pressure pulsations, suppressing the vibrations and noise level of the pump.

 
13120 | | |
 

DXE3J - Directional control valve, pilot operated, with OBE and feedback

— DXPE*J are directional control valves operated by a servo-proportional pilot, with mounting surface compliant with ISO 4401 standards.
— The spool position is controlled by a linear transducer LVDT in closed loop, which ensures high precision and repeatability. In the event of
switch-off or inactive electronics the main spool is set to a fail-safe position by springs.
— The valve is featured by integral electronic based on SMD technology which ensures standard regulations and simplifies the electric wiring. The
unit does not require any adjustment.
— The valve is easy to install. The driver directly manages digital settings. In the event of special applications, you can customize the settings using
the optional kit.

 
85320 | | |
 

EWM-SP-DAD - 轴控制(行程和压力)卡,带Profibus通讯接口

This card has been developed for positioning control with integrated closed loop pressure where an high accuracy is needed, using a digital sensor for positioning, and analogue sensors for pressure sensing.

The card is an axis controller with two positioning control mode, SDD and NC. It communicates with the PLC via the integrated Profibus interface.

An integrated control for pressure limitation for one or two sensors (differential pressure), completes the card.

The output value, voltage or current type, has to be configured via software.

Card setup is via software only, through an USB-B port.

CLICK HERE to download the start-up manual.

 

NOTE: to download the PDF catalogue of the old series click here 

 
89440 | | |